Revision a520723f29aac6598ff0d69e34f5e9b88213e511 authored by Matt Caswell on 14 October 2016, 12:07:00 UTC, committed by Matt Caswell on 28 October 2016, 08:43:41 UTC
The previous commit inspired a review of all the length checks for the extension adding code. This adds more robust checks and adds checks where some were missing previously. The real solution for this is to use WPACKET which is currently in master - but that cannot be applied to release branches. Reviewed-by: Rich Salz <rsalz@openssl.org>
1 parent 83a1d4b
cms-examples.pl
# test/cms-examples.pl
# Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
# project.
#
# ====================================================================
# Copyright (c) 2008 The OpenSSL Project. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
#
# 3. All advertising materials mentioning features or use of this
# software must display the following acknowledgment:
# "This product includes software developed by the OpenSSL Project
# for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
#
# 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
# endorse or promote products derived from this software without
# prior written permission. For written permission, please contact
# licensing@OpenSSL.org.
#
# 5. Products derived from this software may not be called "OpenSSL"
# nor may "OpenSSL" appear in their names without prior written
# permission of the OpenSSL Project.
#
# 6. Redistributions of any form whatsoever must retain the following
# acknowledgment:
# "This product includes software developed by the OpenSSL Project
# for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
#
# THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
# EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
# ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
# OF THE POSSIBILITY OF SUCH DAMAGE.
# ====================================================================
# Perl script to run tests against S/MIME examples in RFC4134
# Assumes RFC is in current directory and called "rfc4134.txt"
use MIME::Base64;
my $badttest = 0;
my $verbose = 1;
my $cmscmd;
my $exdir = "./";
my $exfile = "./rfc4134.txt";
if (-f "../apps/openssl")
{
$cmscmd = "../util/shlib_wrap.sh ../apps/openssl cms";
}
elsif (-f "..\\out32dll\\openssl.exe")
{
$cmscmd = "..\\out32dll\\openssl.exe cms";
}
elsif (-f "..\\out32\\openssl.exe")
{
$cmscmd = "..\\out32\\openssl.exe cms";
}
my @test_list = (
[ "3.1.bin" => "dataout" ],
[ "3.2.bin" => "encode, dataout" ],
[ "4.1.bin" => "encode, verifyder, cont, dss" ],
[ "4.2.bin" => "encode, verifyder, cont, rsa" ],
[ "4.3.bin" => "encode, verifyder, cont_extern, dss" ],
[ "4.4.bin" => "encode, verifyder, cont, dss" ],
[ "4.5.bin" => "verifyder, cont, rsa" ],
[ "4.6.bin" => "encode, verifyder, cont, dss" ],
[ "4.7.bin" => "encode, verifyder, cont, dss" ],
[ "4.8.eml" => "verifymime, dss" ],
[ "4.9.eml" => "verifymime, dss" ],
[ "4.10.bin" => "encode, verifyder, cont, dss" ],
[ "4.11.bin" => "encode, certsout" ],
[ "5.1.bin" => "encode, envelopeder, cont" ],
[ "5.2.bin" => "encode, envelopeder, cont" ],
[ "5.3.eml" => "envelopemime, cont" ],
[ "6.0.bin" => "encode, digest, cont" ],
[ "7.1.bin" => "encode, encrypted, cont" ],
[ "7.2.bin" => "encode, encrypted, cont" ]
);
# Extract examples from RFC4134 text.
# Base64 decode all examples, certificates and
# private keys are converted to PEM format.
my ( $filename, $data );
my @cleanup = ( "cms.out", "cms.err", "tmp.der", "tmp.txt" );
$data = "";
open( IN, $exfile ) || die "Can't Open RFC examples file $exfile";
while (<IN>) {
next unless (/^\|/);
s/^\|//;
next if (/^\*/);
if (/^>(.*)$/) {
$filename = $1;
next;
}
if (/^</) {
$filename = "$exdir/$filename";
if ( $filename =~ /\.bin$/ || $filename =~ /\.eml$/ ) {
$data = decode_base64($data);
open OUT, ">$filename";
binmode OUT;
print OUT $data;
close OUT;
push @cleanup, $filename;
}
elsif ( $filename =~ /\.cer$/ ) {
write_pem( $filename, "CERTIFICATE", $data );
}
elsif ( $filename =~ /\.pri$/ ) {
write_pem( $filename, "PRIVATE KEY", $data );
}
$data = "";
$filename = "";
}
else {
$data .= $_;
}
}
my $secretkey =
"73:7c:79:1f:25:ea:d0:e0:46:29:25:43:52:f7:dc:62:91:e5:cb:26:91:7a:da:32";
foreach (@test_list) {
my ( $file, $tlist ) = @$_;
print "Example file $file:\n";
if ( $tlist =~ /encode/ ) {
run_reencode_test( $exdir, $file );
}
if ( $tlist =~ /certsout/ ) {
run_certsout_test( $exdir, $file );
}
if ( $tlist =~ /dataout/ ) {
run_dataout_test( $exdir, $file );
}
if ( $tlist =~ /verify/ ) {
run_verify_test( $exdir, $tlist, $file );
}
if ( $tlist =~ /digest/ ) {
run_digest_test( $exdir, $tlist, $file );
}
if ( $tlist =~ /encrypted/ ) {
run_encrypted_test( $exdir, $tlist, $file, $secretkey );
}
if ( $tlist =~ /envelope/ ) {
run_envelope_test( $exdir, $tlist, $file );
}
}
foreach (@cleanup) {
unlink $_;
}
if ($badtest) {
print "\n$badtest TESTS FAILED!!\n";
}
else {
print "\n***All tests successful***\n";
}
sub write_pem {
my ( $filename, $str, $data ) = @_;
$filename =~ s/\.[^.]*$/.pem/;
push @cleanup, $filename;
open OUT, ">$filename";
print OUT "-----BEGIN $str-----\n";
print OUT $data;
print OUT "-----END $str-----\n";
close OUT;
}
sub run_reencode_test {
my ( $cmsdir, $tfile ) = @_;
unlink "tmp.der";
system( "$cmscmd -cmsout -inform DER -outform DER"
. " -in $cmsdir/$tfile -out tmp.der" );
if ($?) {
print "\tReencode command FAILED!!\n";
$badtest++;
}
elsif ( !cmp_files( "$cmsdir/$tfile", "tmp.der" ) ) {
print "\tReencode FAILED!!\n";
$badtest++;
}
else {
print "\tReencode passed\n" if $verbose;
}
}
sub run_certsout_test {
my ( $cmsdir, $tfile ) = @_;
unlink "tmp.der";
unlink "tmp.pem";
system( "$cmscmd -cmsout -inform DER -certsout tmp.pem"
. " -in $cmsdir/$tfile -out tmp.der" );
if ($?) {
print "\tCertificate output command FAILED!!\n";
$badtest++;
}
else {
print "\tCertificate output passed\n" if $verbose;
}
}
sub run_dataout_test {
my ( $cmsdir, $tfile ) = @_;
unlink "tmp.txt";
system(
"$cmscmd -data_out -inform DER" . " -in $cmsdir/$tfile -out tmp.txt" );
if ($?) {
print "\tDataout command FAILED!!\n";
$badtest++;
}
elsif ( !cmp_files( "$cmsdir/ExContent.bin", "tmp.txt" ) ) {
print "\tDataout compare FAILED!!\n";
$badtest++;
}
else {
print "\tDataout passed\n" if $verbose;
}
}
sub run_verify_test {
my ( $cmsdir, $tlist, $tfile ) = @_;
unlink "tmp.txt";
$form = "DER" if $tlist =~ /verifyder/;
$form = "SMIME" if $tlist =~ /verifymime/;
$cafile = "$cmsdir/CarlDSSSelf.pem" if $tlist =~ /dss/;
$cafile = "$cmsdir/CarlRSASelf.pem" if $tlist =~ /rsa/;
$cmd =
"$cmscmd -verify -inform $form"
. " -CAfile $cafile"
. " -in $cmsdir/$tfile -out tmp.txt";
$cmd .= " -content $cmsdir/ExContent.bin" if $tlist =~ /cont_extern/;
system("$cmd 2>cms.err 1>cms.out");
if ($?) {
print "\tVerify command FAILED!!\n";
$badtest++;
}
elsif ( $tlist =~ /cont/
&& !cmp_files( "$cmsdir/ExContent.bin", "tmp.txt" ) )
{
print "\tVerify content compare FAILED!!\n";
$badtest++;
}
else {
print "\tVerify passed\n" if $verbose;
}
}
sub run_envelope_test {
my ( $cmsdir, $tlist, $tfile ) = @_;
unlink "tmp.txt";
$form = "DER" if $tlist =~ /envelopeder/;
$form = "SMIME" if $tlist =~ /envelopemime/;
$cmd =
"$cmscmd -decrypt -inform $form"
. " -recip $cmsdir/BobRSASignByCarl.pem"
. " -inkey $cmsdir/BobPrivRSAEncrypt.pem"
. " -in $cmsdir/$tfile -out tmp.txt";
system("$cmd 2>cms.err 1>cms.out");
if ($?) {
print "\tDecrypt command FAILED!!\n";
$badtest++;
}
elsif ( $tlist =~ /cont/
&& !cmp_files( "$cmsdir/ExContent.bin", "tmp.txt" ) )
{
print "\tDecrypt content compare FAILED!!\n";
$badtest++;
}
else {
print "\tDecrypt passed\n" if $verbose;
}
}
sub run_digest_test {
my ( $cmsdir, $tlist, $tfile ) = @_;
unlink "tmp.txt";
my $cmd =
"$cmscmd -digest_verify -inform DER" . " -in $cmsdir/$tfile -out tmp.txt";
system("$cmd 2>cms.err 1>cms.out");
if ($?) {
print "\tDigest verify command FAILED!!\n";
$badtest++;
}
elsif ( $tlist =~ /cont/
&& !cmp_files( "$cmsdir/ExContent.bin", "tmp.txt" ) )
{
print "\tDigest verify content compare FAILED!!\n";
$badtest++;
}
else {
print "\tDigest verify passed\n" if $verbose;
}
}
sub run_encrypted_test {
my ( $cmsdir, $tlist, $tfile, $key ) = @_;
unlink "tmp.txt";
system( "$cmscmd -EncryptedData_decrypt -inform DER"
. " -secretkey $key"
. " -in $cmsdir/$tfile -out tmp.txt" );
if ($?) {
print "\tEncrypted Data command FAILED!!\n";
$badtest++;
}
elsif ( $tlist =~ /cont/
&& !cmp_files( "$cmsdir/ExContent.bin", "tmp.txt" ) )
{
print "\tEncrypted Data content compare FAILED!!\n";
$badtest++;
}
else {
print "\tEncryptedData verify passed\n" if $verbose;
}
}
sub cmp_files {
my ( $f1, $f2 ) = @_;
my ( $fp1, $fp2 );
my ( $rd1, $rd2 );
if ( !open( $fp1, "<$f1" ) ) {
print STDERR "Can't Open file $f1\n";
return 0;
}
if ( !open( $fp2, "<$f2" ) ) {
print STDERR "Can't Open file $f2\n";
return 0;
}
binmode $fp1;
binmode $fp2;
my $ret = 0;
for ( ; ; ) {
$n1 = sysread $fp1, $rd1, 4096;
$n2 = sysread $fp2, $rd2, 4096;
last if ( $n1 != $n2 );
last if ( $rd1 ne $rd2 );
if ( $n1 == 0 ) {
$ret = 1;
last;
}
}
close $fp1;
close $fp2;
return $ret;
}

Computing file changes ...