Revision b095884a58876ccd3e65f620b7f80d61b4bce687 authored by Matt Caswell on 07 January 2015, 14:18:13 UTC, committed by Matt Caswell on 08 January 2015, 14:14:56 UTC
ssl3_setup_buffers or pqueue_insert fail. The former will fail if there is a malloc failure, whilst the latter will fail if attempting to add a duplicate record to the queue. This should never happen because duplicate records should be detected and dropped before any attempt to add them to the queue. Unfortunately records that arrive that are for the next epoch are not being recorded correctly, and therefore replays are not being detected. Additionally, these "should not happen" failures that can occur in dtls1_buffer_record are not being treated as fatal and therefore an attacker could exploit this by sending repeated replay records for the next epoch, eventually causing a DoS through memory exhaustion. Thanks to Chris Mueller for reporting this issue and providing initial analysis and a patch. Further analysis and the final patch was performed by Matt Caswell from the OpenSSL development team. CVE-2015-0206 Reviewed-by: Dr Stephen Henson <steve@openssl.org> (cherry picked from commit 652ff0f4796eecd8729b4690f2076d1c7ccb2862)
1 parent f7fe3d2
rsautl.c
/* rsautl.c */
/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
* project 2000.
*/
/* ====================================================================
* Copyright (c) 2000 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* licensing@OpenSSL.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
#include <openssl/opensslconf.h>
#ifndef OPENSSL_NO_RSA
#include "apps.h"
#include <string.h>
#include <openssl/err.h>
#include <openssl/pem.h>
#include <openssl/rsa.h>
#define RSA_SIGN 1
#define RSA_VERIFY 2
#define RSA_ENCRYPT 3
#define RSA_DECRYPT 4
#define KEY_PRIVKEY 1
#define KEY_PUBKEY 2
#define KEY_CERT 3
static void usage(void);
#undef PROG
#define PROG rsautl_main
int MAIN(int argc, char **);
int MAIN(int argc, char **argv)
{
ENGINE *e = NULL;
BIO *in = NULL, *out = NULL;
char *infile = NULL, *outfile = NULL;
#ifndef OPENSSL_NO_ENGINE
char *engine = NULL;
#endif
char *keyfile = NULL;
char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
int keyform = FORMAT_PEM;
char need_priv = 0, badarg = 0, rev = 0;
char hexdump = 0, asn1parse = 0;
X509 *x;
EVP_PKEY *pkey = NULL;
RSA *rsa = NULL;
unsigned char *rsa_in = NULL, *rsa_out = NULL, pad;
char *passargin = NULL, *passin = NULL;
int rsa_inlen, rsa_outlen = 0;
int keysize;
int ret = 1;
argc--;
argv++;
if(!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
if (!load_config(bio_err, NULL))
goto end;
ERR_load_crypto_strings();
OpenSSL_add_all_algorithms();
pad = RSA_PKCS1_PADDING;
while(argc >= 1)
{
if (!strcmp(*argv,"-in")) {
if (--argc < 1)
badarg = 1;
else
infile= *(++argv);
} else if (!strcmp(*argv,"-out")) {
if (--argc < 1)
badarg = 1;
else
outfile= *(++argv);
} else if(!strcmp(*argv, "-inkey")) {
if (--argc < 1)
badarg = 1;
else
keyfile = *(++argv);
} else if (!strcmp(*argv,"-passin")) {
if (--argc < 1)
badarg = 1;
else
passargin= *(++argv);
} else if (strcmp(*argv,"-keyform") == 0) {
if (--argc < 1)
badarg = 1;
else
keyform=str2fmt(*(++argv));
#ifndef OPENSSL_NO_ENGINE
} else if(!strcmp(*argv, "-engine")) {
if (--argc < 1)
badarg = 1;
else
engine = *(++argv);
#endif
} else if(!strcmp(*argv, "-pubin")) {
key_type = KEY_PUBKEY;
} else if(!strcmp(*argv, "-certin")) {
key_type = KEY_CERT;
}
else if(!strcmp(*argv, "-asn1parse")) asn1parse = 1;
else if(!strcmp(*argv, "-hexdump")) hexdump = 1;
else if(!strcmp(*argv, "-raw")) pad = RSA_NO_PADDING;
else if(!strcmp(*argv, "-oaep")) pad = RSA_PKCS1_OAEP_PADDING;
else if(!strcmp(*argv, "-ssl")) pad = RSA_SSLV23_PADDING;
else if(!strcmp(*argv, "-pkcs")) pad = RSA_PKCS1_PADDING;
else if(!strcmp(*argv, "-x931")) pad = RSA_X931_PADDING;
else if(!strcmp(*argv, "-sign")) {
rsa_mode = RSA_SIGN;
need_priv = 1;
} else if(!strcmp(*argv, "-verify")) rsa_mode = RSA_VERIFY;
else if(!strcmp(*argv, "-rev")) rev = 1;
else if(!strcmp(*argv, "-encrypt")) rsa_mode = RSA_ENCRYPT;
else if(!strcmp(*argv, "-decrypt")) {
rsa_mode = RSA_DECRYPT;
need_priv = 1;
} else badarg = 1;
if(badarg) {
usage();
goto end;
}
argc--;
argv++;
}
if(need_priv && (key_type != KEY_PRIVKEY)) {
BIO_printf(bio_err, "A private key is needed for this operation\n");
goto end;
}
#ifndef OPENSSL_NO_ENGINE
e = setup_engine(bio_err, engine, 0);
#endif
if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
/* FIXME: seed PRNG only if needed */
app_RAND_load_file(NULL, bio_err, 0);
switch(key_type) {
case KEY_PRIVKEY:
pkey = load_key(bio_err, keyfile, keyform, 0,
passin, e, "Private Key");
break;
case KEY_PUBKEY:
pkey = load_pubkey(bio_err, keyfile, keyform, 0,
NULL, e, "Public Key");
break;
case KEY_CERT:
x = load_cert(bio_err, keyfile, keyform,
NULL, e, "Certificate");
if(x) {
pkey = X509_get_pubkey(x);
X509_free(x);
}
break;
}
if(!pkey) {
return 1;
}
rsa = EVP_PKEY_get1_RSA(pkey);
EVP_PKEY_free(pkey);
if(!rsa) {
BIO_printf(bio_err, "Error getting RSA key\n");
ERR_print_errors(bio_err);
goto end;
}
if(infile) {
if(!(in = BIO_new_file(infile, "rb"))) {
BIO_printf(bio_err, "Error Reading Input File\n");
ERR_print_errors(bio_err);
goto end;
}
} else in = BIO_new_fp(stdin, BIO_NOCLOSE);
if(outfile) {
if(!(out = BIO_new_file(outfile, "wb"))) {
BIO_printf(bio_err, "Error Reading Output File\n");
ERR_print_errors(bio_err);
goto end;
}
} else {
out = BIO_new_fp(stdout, BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
#endif
}
keysize = RSA_size(rsa);
rsa_in = OPENSSL_malloc(keysize * 2);
rsa_out = OPENSSL_malloc(keysize);
/* Read the input data */
rsa_inlen = BIO_read(in, rsa_in, keysize * 2);
if(rsa_inlen <= 0) {
BIO_printf(bio_err, "Error reading input Data\n");
exit(1);
}
if(rev) {
int i;
unsigned char ctmp;
for(i = 0; i < rsa_inlen/2; i++) {
ctmp = rsa_in[i];
rsa_in[i] = rsa_in[rsa_inlen - 1 - i];
rsa_in[rsa_inlen - 1 - i] = ctmp;
}
}
switch(rsa_mode) {
case RSA_VERIFY:
rsa_outlen = RSA_public_decrypt(rsa_inlen, rsa_in, rsa_out, rsa, pad);
break;
case RSA_SIGN:
rsa_outlen = RSA_private_encrypt(rsa_inlen, rsa_in, rsa_out, rsa, pad);
break;
case RSA_ENCRYPT:
rsa_outlen = RSA_public_encrypt(rsa_inlen, rsa_in, rsa_out, rsa, pad);
break;
case RSA_DECRYPT:
rsa_outlen = RSA_private_decrypt(rsa_inlen, rsa_in, rsa_out, rsa, pad);
break;
}
if(rsa_outlen <= 0) {
BIO_printf(bio_err, "RSA operation error\n");
ERR_print_errors(bio_err);
goto end;
}
ret = 0;
if(asn1parse) {
if(!ASN1_parse_dump(out, rsa_out, rsa_outlen, 1, -1)) {
ERR_print_errors(bio_err);
}
} else if(hexdump) BIO_dump(out, (char *)rsa_out, rsa_outlen);
else BIO_write(out, rsa_out, rsa_outlen);
end:
RSA_free(rsa);
BIO_free(in);
BIO_free_all(out);
if(rsa_in) OPENSSL_free(rsa_in);
if(rsa_out) OPENSSL_free(rsa_out);
if(passin) OPENSSL_free(passin);
return ret;
}
static void usage()
{
BIO_printf(bio_err, "Usage: rsautl [options]\n");
BIO_printf(bio_err, "-in file input file\n");
BIO_printf(bio_err, "-out file output file\n");
BIO_printf(bio_err, "-inkey file input key\n");
BIO_printf(bio_err, "-keyform arg private key format - default PEM\n");
BIO_printf(bio_err, "-pubin input is an RSA public\n");
BIO_printf(bio_err, "-certin input is a certificate carrying an RSA public key\n");
BIO_printf(bio_err, "-ssl use SSL v2 padding\n");
BIO_printf(bio_err, "-raw use no padding\n");
BIO_printf(bio_err, "-pkcs use PKCS#1 v1.5 padding (default)\n");
BIO_printf(bio_err, "-oaep use PKCS#1 OAEP\n");
BIO_printf(bio_err, "-sign sign with private key\n");
BIO_printf(bio_err, "-verify verify with public key\n");
BIO_printf(bio_err, "-encrypt encrypt with public key\n");
BIO_printf(bio_err, "-decrypt decrypt with private key\n");
BIO_printf(bio_err, "-hexdump hex dump output\n");
#ifndef OPENSSL_NO_ENGINE
BIO_printf(bio_err, "-engine e use engine e, possibly a hardware device.\n");
BIO_printf (bio_err, "-passin arg pass phrase source\n");
#endif
}
#else /* !OPENSSL_NO_RSA */
# if PEDANTIC
static void *dummy=&dummy;
# endif
#endif

Computing file changes ...