Revision c2bbf058736b8cb5b32e78a50d1410fa34cc8284 authored by Richard Levitte on 15 February 2016, 18:37:20 UTC, committed by Richard Levitte on 15 February 2016, 18:37:20 UTC
Reviewed-by: Stephen Henson <steve@openssl.org>
1 parent c35f5c3
Makefile.in
##
## Makefile for OpenSSL
##
## {- join("\n## ", @autowarntext) -}
VERSION={- $config{version} -}
MAJOR={- $config{major} -}
MINOR={- $config{minor} -}
SHLIB_VERSION_NUMBER={- $config{shlib_version_number} -}
SHLIB_VERSION_HISTORY={- $config{shlib_version_history} -}
SHLIB_MAJOR={- $config{shlib_major} -}
SHLIB_MINOR={- $config{shlib_minor} -}
SHLIB_EXT={- $target{shared_extension} -}
PLATFORM={- $config{target} -}
OPTIONS={- $config{options} -}
CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -})
SHLIB_TARGET={- $target{shared_target} -}
# HERE indicates where this Makefile lives. This can be used to indicate
# where sub-Makefiles are expected to be. Currently has very limited usage,
# and should probably not be bothered with at all.
HERE=.
# DESTDIR is for package builders so that they can configure
# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
# Normally it is left empty.
DESTDIR=
# Do not edit these manually. Use Configure with --prefix or --openssldir
# to change this! Short explanation in the top comment in Configure
INSTALLTOP={- # $prefix is used in the OPENSSLDIR perl snippet
#
our $prefix = $config{prefix} || "/usr/local";
$prefix -}
OPENSSLDIR={- #
# The logic here is that if no --openssldir was given,
# OPENSSLDIR will get the value from $prefix plus "/ssl".
# If --openssldir was given and the value is an absolute
# path, OPENSSLDIR will get its value without change.
# If the value from --openssldir is a relative path,
# OPENSSLDIR will get $prefix with the --openssldir
# value appended as a subdirectory.
#
use File::Spec::Functions;
our $openssldir =
$config{openssldir} ?
(file_name_is_absolute($config{openssldir}) ?
$config{openssldir}
: catdir($prefix, $config{openssldir}))
: catdir($prefix, "ssl");
$openssldir -}
LIBDIR={- #
# if $prefix/lib$target{multilib} is not an existing
# directory, then assume that it's not searched by linker
# automatically, in which case adding $target{multilib} suffix
# causes more grief than we're ready to tolerate, so don't...
our $multilib =
-d "$prefix/lib$target{multilib}" ? $target{multilib} : "";
our $libdir = $config{libdir} || "lib$multilib";
$libdir -}
ENGINESDIR={- use File::Spec::Functions;
catdir($prefix,$libdir,"engines") -}
# NO_IDEA - Define to build without the IDEA algorithm
# NO_RC4 - Define to build without the RC4 algorithm
# NO_RC2 - Define to build without the RC2 algorithm
# THREADS - Define when building with threads, you will probably also need any
# system defines as well, i.e. _REENTRANT for Solaris 2.[34]
# TERMIO - Define the termio terminal subsystem, needed if sgtty is missing.
# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
# DEVRANDOM - Give this the value of the 'random device' if your OS supports
# one. 32 bytes will be read from this when the random
# number generator is initalised.
# SSL_FORBID_ENULL - define if you want the server to be not able to use the
# NULL encryption ciphers.
#
# LOCK_DEBUG - turns on lots of lock debug output :-)
# REF_DEBUG - turn on some xyz_free() assertions.
# REF_PRINT - prints some stuff on structure free.
# MFUNC - Make all Malloc/Free/Realloc calls call
# CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
# call application defined callbacks via CRYPTO_set_mem_functions()
# MD5_ASM needs to be defined to use the x86 assembler for MD5
# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8. It must
# equal 4.
# PKCS1_CHECK - pkcs1 tests.
CROSS_COMPILE= {- $config{cross_compile_prefix} -}
CC= $(CROSS_COMPILE){- $target{cc} -}
CFLAG={- our $cflags2 = join(" ",(map { "-D".$_} @{$config{defines}}),"-DOPENSSLDIR=\"\\\"\$(OPENSSLDIR)\\\"\"","-DENGINESDIR=\"\\\"\$(ENGINESDIR)\\\"\"") -} {- $config{cflags} -}
CFLAG_Q={- $cflags2 =~ s|([\\"])|\\$1|g; $cflags2 -} {- $config{cflags} -}
DEPFLAG= {- join(" ",map { "-D".$_} @{$config{depdefines}}) -}
LDFLAG= {- $config{lflags} -}
PLIB_LDFLAG= {- $config{plib_lflags} -}
EX_LIBS= {- $config{ex_libs} -}
EXE_EXT= {- $target{exe_extension} -}
ARFLAGS= {- $target{arflags} -}
AR=$(CROSS_COMPILE){- $target{ar} -} $(ARFLAGS) r
RANLIB= {- $target{ranlib} -}
NM= $(CROSS_COMPILE){- $target{nm} -}
PERL= {- $config{perl} -}
#RM= echo --
RM= rm -f
TAR= tar
TARFLAGS= --no-recursion
MAKEDEPPROG=$(CROSS_COMPILE){- $config{makedepprog} -}
# We let the C compiler driver to take care of .s files. This is done in
# order to be excused from maintaining a separate set of architecture
# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
# gcc, then the driver will automatically translate it to -xarch=v8plus
# and pass it down to assembler.
AS=$(CC) -c
ASFLAG=$(CFLAG)
# For x86 assembler: Set PROCESSOR to 386 if you want to support
# the 80386.
PROCESSOR= {- $config{processor} -}
# CPUID module collects small commonly used assembler snippets
CPUID_OBJ= {- $target{cpuid_obj} -}
BN_ASM= {- $target{bn_obj} -}
EC_ASM= {- $target{ec_obj} -}
DES_ENC= {- $target{des_obj} -}
AES_ENC= {- $target{aes_obj} -}
BF_ENC= {- $target{bf_obj} -}
CAST_ENC= {- $target{cast_obj} -}
RC4_ENC= {- $target{rc4_obj} -}
RC5_ENC= {- $target{rc5_obj} -}
MD5_ASM_OBJ= {- $target{md5_obj} -}
SHA1_ASM_OBJ= {- $target{sha1_obj} -}
RMD160_ASM_OBJ= {- $target{rmd160_obj} -}
WP_ASM_OBJ= {- $target{wp_obj} -}
CMLL_ENC= {- $target{cmll_obj} -}
MODES_ASM_OBJ= {- $target{modes_obj} -}
PADLOCK_ASM_OBJ= {- $target{padlock_obj} -}
CHACHA_ENC= {- $target{chacha_obj} -}
POLY1305_ASM_OBJ= {- $target{poly1305_obj} -}
PERLASM_SCHEME= {- $target{perlasm_scheme} -}
# Zlib stuff
ZLIB_INCLUDE={- $withargs{zlib_include} -}
LIBZLIB={- $withargs{zlib_lib} -}
# This is the location of fipscanister.o and friends.
# The FIPS module build will place it $(INSTALLTOP)/lib
# but since $(INSTALLTOP) can only take the default value
# when the module is built it will be in /usr/local/ssl/lib
# $(INSTALLTOP) for this build may be different so hard
# code the path.
FIPSLIBDIR={- $config{fipslibdir} -}
# The location of the library which contains fipscanister.o
# normally it will be libcrypto. If not compiling in FIPS mode
# at all this is empty making it a useful test for a FIPS compile.
FIPSCANLIB={- $config{fips} ? "libcrypto" : "" -}
# Shared library base address. Currently only used on Windows.
#
BASEADDR={- $config{baseaddr} -}
DIRS= {- join(" ", @{$config{dirs}}) -}
SHLIBDIRS= crypto ssl
INSTALL_SUBS= engines apps tools
# dirs in crypto to build
SDIRS= {- join(" ", @{$config{sdirs}}) -}
# tests to perform. "alltests" is a special word indicating that all tests
# should be performed.
TESTS = alltests
MAKEFILE= Makefile
MANDIR=$(INSTALLTOP)/share/man
MAN1=1
MAN3=3
MANSUFFIX=
HTMLSUFFIX=html
HTMLDIR=$(INSTALLTOP)/share/doc/$(BASENAME)/html
SHELL=/bin/sh
TOP= .
LIBS= libcrypto.a libssl.a
SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
SHARED_SSL=libssl$(SHLIB_EXT)
SHARED_LIBS={- '$(SHARED_CRYPTO) $(SHARED_SSL)' if (!$config{no_shared}) -}
SHARED_LDFLAG={- $target{shared_ldflag}
# Unlike other OSes (like Solaris, Linux, Tru64,
# IRIX) BSD run-time linkers (tested OpenBSD, NetBSD
# and FreeBSD) "demand" RPATH set on .so objects.
# Apparently application RPATH is not global and
# does not apply to .so linked with other .so.
# Problem manifests itself when libssl.so fails to
# load libcrypto.so. One can argue that we should
# engrave this into Makefile.shared rules or into
# BSD-* config lines above. Meanwhile let's try to
# be cautious and pass -rpath to linker only when
# $prefix is not /usr.
. ($config{target} =~ m|^BSD-| && $prefix !~ m|^/usr/.*$|
? " -Wl,-rpath,\$\$(LIBRPATH)" : "") -}
SHARED_RCFLAG={- $target{shared_rcflag} -}
GENERAL= Makefile
BASENAME= openssl
NAME= $(BASENAME)-$(VERSION)
TARFILE= ../$(NAME).tar
HEADER= e_os.h
# Directories created on install if they don't exist.
INSTALLDIRS= \
$(DESTDIR)$(INSTALLTOP)/bin \
$(DESTDIR)$(INSTALLTOP)/$(LIBDIR) \
$(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/engines \
$(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
$(DESTDIR)$(INSTALLTOP)/include/openssl \
$(DESTDIR)$(OPENSSLDIR)/misc \
$(DESTDIR)$(OPENSSLDIR)/certs \
$(DESTDIR)$(OPENSSLDIR)/private
all: Makefile build_all_but_tests
# as we stick to -e, CLEARENV ensures that local variables in lower
# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
# shell, which [annoyingly enough] terminates unset with error if VAR
# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
# which terminates unset with error if no variable was present:-(
CLEARENV= TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS} \
$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES} \
$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC} \
$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \
$${HEADER+HEADER} \
$${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \
$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \
$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \
$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \
$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
# LC_ALL=C ensures that error [and other] messages are delivered in
# same language for uniform treatment.
BUILDENV= LC_ALL=C PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)'\
CC='$(CC)' CFLAG='$(CFLAG)' CFLAG_Q='$(CFLAG_Q)' \
AS='$(CC)' ASFLAG='$(CFLAG) -c' \
AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \
CROSS_COMPILE='$(CROSS_COMPILE)' \
PERL='$(PERL)' \
SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)' \
DESTDIR='$(DESTDIR)' \
INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)' \
LIBDIR='$(LIBDIR)' \
DEPFLAG='$(DEPFLAG)' \
SHARED_LDFLAG='$(SHARED_LDFLAG)' \
SHARED_RCFLAG='$(SHARED_RCFLAG)' \
ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)' \
EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
LDFLAG='$(LDFLAG)' \
PLIB_LDFLAG='$(PLIB_LDFLAG)' EX_LIBS='$(EX_LIBS)' \
CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)' \
EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)' \
AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \
BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)' \
RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)' \
SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)' \
MD5_ASM_OBJ='$(MD5_ASM_OBJ)' \
RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
WP_ASM_OBJ='$(WP_ASM_OBJ)' \
MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
PADLOCK_ASM_OBJ='$(PADLOCK_ASM_OBJ)' \
CHACHA_ENC='$(CHACHA_ENC)' \
POLY1305_ASM_OBJ='$(POLY1305_ASM_OBJ)' \
PERLASM_SCHEME='$(PERLASM_SCHEME)' \
FIPSLIBDIR='${FIPSLIBDIR}' \
FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
# which in turn eliminates ambiguities in variable treatment with -e.
# BUILD_CMD is a generic macro to build a given target in a given
# subdirectory. The target must be given through the shell variable
# `target' and the subdirectory to build in must be given through `dir'.
# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
# BUILD_ONE_CMD instead.
#
# RECURSIVE_BUILD_CMD is a macro to build a given target in all
# subdirectories defined in $(DIRS). It requires that the target
# is given through the shell variable `target'.
#
# BUILD_ONE_CMD is a macro to build a given target in a given
# subdirectory if that subdirectory is part of $(DIRS). It requires
# exactly the same shell variables as BUILD_CMD.
BUILD_CMD= if [ -d "$$dir" ]; then \
( cd $$dir && echo "making $$target in $$dir..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
) || exit 1; \
fi
RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
BUILD_ONE_CMD=\
if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
$(BUILD_CMD); \
fi
reflect:
@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
sub_all: build_all
build_all_but_tests: build_libs build_apps build_tools
build_all: build_all_but_tests build_tests
build_libs: build_libcrypto build_libssl openssl.pc
build_libcrypto: build_crypto build_engines libcrypto.pc
build_libssl: build_ssl libssl.pc
build_crypto:
@dir=crypto; target=all; $(BUILD_ONE_CMD)
build_ssl: build_crypto
@dir=ssl; target=all; $(BUILD_ONE_CMD)
build_engines: build_crypto
@dir=engines; target=all; AS='$(CC) -c'; export AS; $(BUILD_ONE_CMD)
build_apps: build_libs
@dir=apps; target=all; $(BUILD_ONE_CMD)
build_tests: build_libs
@dir=test; target=all; $(BUILD_ONE_CMD)
build_tools: build_libs
@dir=tools; target=all; $(BUILD_ONE_CMD)
all_testapps: build_libs build_testapps
build_testapps:
@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
libcrypto$(SHLIB_EXT): libcrypto.a
@if [ "$(SHLIB_TARGET)" != "" ]; then \
if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
export CC FIPSLD_CC; \
fi; \
$(MAKE) -e SHLIBDIRS=crypto CC="$${CC:-$(CC)}" build-shared; \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
fi
libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
@if [ "$(SHLIB_TARGET)" != "" ]; then \
$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
fi
link-shared:
@ set -e; for i in $(SHLIBDIRS); do \
$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
symlink.$(SHLIB_TARGET); \
libs="$$libs -l$$i"; \
done
build-shared: do_$(SHLIB_TARGET) link-shared
do_$(SHLIB_TARGET):
@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
LIBDEPS="$$libs $(EX_LIBS)" \
link_a.$(SHLIB_TARGET); \
libs="-l$$i $$libs"; \
case "$(PLATFORM)" in \
Cygwin*) \
rm -f apps/cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll; \
rm -f test/cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll; \
cp cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll apps/; \
cp cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll test/; \
;; \
mingw*) \
case $$i in \
crypto) i=libeay32;; \
ssl) i=ssleay32;; \
esac; \
rm -f apps/$$i.dll; \
rm -f test/$$i.dll; \
cp $$i.dll apps/; \
cp $$i.dll test/; \
esac; \
done
libcrypto.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL-libcrypto'; \
echo 'Description: OpenSSL cryptography library'; \
echo 'Version: '$(VERSION); \
echo 'Requires: '; \
echo 'Libs: -L$${libdir} -lcrypto'; \
echo 'Libs.private: $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir}' ) > libcrypto.pc
libssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL-libssl'; \
echo 'Description: Secure Sockets Layer and cryptography libraries'; \
echo 'Version: '$(VERSION); \
echo 'Requires.private: libcrypto'; \
echo 'Libs: -L$${libdir} -lssl'; \
echo 'Libs.private: $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir}' ) > libssl.pc
openssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL'; \
echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
echo 'Version: '$(VERSION); \
echo 'Requires: libssl libcrypto' ) > openssl.pc
Makefile: Makefile.in Configure config
@echo "Makefile is older than Makefile.in, Configure or config."
@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
@false
libclean:
rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
clean: libclean
rm -f */*/*.o */*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
rm -rf *.bak certs/.0
@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
rm -f $(LIBS) tags TAGS
rm -f openssl.pc libssl.pc libcrypto.pc
rm -f speed.* .pure
rm -f $(TARFILE)
makefile.one: files
$(PERL) util/mk1mf.pl >makefile.one; \
sh util/do_ms.sh
files:
$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
@set -e; target=files; $(RECURSIVE_BUILD_CMD)
gentests:
@(cd test && echo "generating dummy tests (if needed)..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
rehash: rehash.time
rehash.time: certs build_apps build_tools
@if [ -z "$(CROSS_COMPILE)" ]; then \
(OPENSSL="`pwd`/util/opensslwrap.sh"; \
[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
OPENSSL_DEBUG_MEMORY=on; OPENSSL_CONF=/dev/null ; \
export OPENSSL OPENSSL_DEBUG_MEMORY OPENSSL_CONF; \
$$OPENSSL rehash certs/demo \
|| $(PERL) tools/c_rehash certs/demo) && \
touch rehash.time; \
else :; fi
test: files tests
tests: build_tests rehash
@(cd test && echo "testing..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
@if [ -z "$(CROSS_COMPILE)" ]; then \
OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a; \
fi
list-tests:
@(cd test && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. list-tests)
report:
@$(PERL) util/selftest.pl
tags TAGS: FORCE
rm -f TAGS tags
-ctags -R .
-etags `find . -name '*.[ch]' -o -name '*.pm'`
FORCE:
depend:
@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
update: generate errors ordinals depend
generate:
(cd apps && PERL='${PERL}' $(MAKE) generate)
(cd crypto/bn && PERL='${PERL}' $(MAKE) generate)
(cd crypto/objects && PERL='${PERL}' $(MAKE) generate)
errors:
$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
$(PERL) util/mkerr.pl -recurse -write
(cd engines; $(MAKE) PERL=$(PERL) errors)
(cd crypto/ct; $(MAKE) PERL=$(PERL) errors)
ordinals: util/libeay.num util/ssleay.num test_ordinals TABLE
util/libeay.num::
$(PERL) util/mkdef.pl crypto update
util/ssleay.num::
$(PERL) util/mkdef.pl ssl update
test_ordinals:
TOP=$(TOP) PERL=$(PERL) $(PERL) test/run_tests.pl test_ordinals
TABLE: Configure Configurations/*.conf
(echo 'Output of `Configure TABLE'"':"; \
$(PERL) Configure TABLE) > TABLE
# Build distribution tar-file. As the list of files returned by "find" is
# pretty long, on several platforms a "too many arguments" error or similar
# would occur. Therefore the list of files is temporarily stored into a file
# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
# tar does not support the --files-from option.
TAR_COMMAND=$(TAR) $(TARFLAGS) --files-from $(TARFILE).list \
--owner 0 --group 0 \
--transform 's|^|$(NAME)/|' \
-cvf -
$(TARFILE).list:
git diff --quiet HEAD
git ls-files | sort > $(TARFILE).list
tar: $(TARFILE).list
find . -type d -print | xargs chmod 755
find . -type f -print | xargs chmod a+r
find . -type f -perm -0100 -print | xargs chmod a+x
$(TAR_COMMAND) | gzip --best > $(TARFILE).gz
rm -f $(TARFILE).list
ls -l $(TARFILE).gz
tar-snap: $(TARFILE).list
$(TAR_COMMAND) > $(TARFILE)
rm -f $(TARFILE).list
ls -l $(TARFILE)
dist:
$(PERL) Configure dist
@$(MAKE) SDIRS='$(SDIRS)' clean
@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' $(DISTTARVARS) tar
install: all install_docs install_sw
uninstall: uninstall_sw uninstall_docs
install_sw:
@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALLDIRS)
@set -e; for i in include/openssl/*.h; do \
(cp $$i $(DESTDIR)$(INSTALLTOP)/$$i; \
chmod 644 $(DESTDIR)$(INSTALLTOP)/$$i ); \
done;
@set -e; target=install; for dir in $(INSTALL_SUBS); do $(BUILD_CMD); done
@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
do \
if [ -f "$$i" ]; then \
( echo installing $$i; \
cp $$i $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
$(RANLIB) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
fi; \
done;
@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
tmp="$(SHARED_LIBS)"; \
for i in $${tmp:-x}; \
do \
if [ -f "$$i" -o -f "$$i.a" ]; then \
( echo installing $$i; \
if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
cp $$c $(DESTDIR)$(INSTALLTOP)/bin/$$c.new; \
chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$c.new; \
mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$c.new $(DESTDIR)$(INSTALLTOP)/bin/$$c; \
cp $$i $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
else \
cp $$i $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
chmod 555 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
fi ); \
if expr $(PLATFORM) : 'mingw' > /dev/null; then \
( case $$i in \
*crypto*) i=libeay32.dll;; \
*ssl*) i=ssleay32.dll;; \
esac; \
echo installing $$i; \
cp $$i $(DESTDIR)$(INSTALLTOP)/bin/$$i.new; \
chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$i.new; \
mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$i.new $(DESTDIR)$(INSTALLTOP)/bin/$$i ); \
fi; \
fi; \
done; \
( here="`pwd`"; \
cd $(DESTDIR)$(INSTALLTOP)/$(LIBDIR); \
$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
if [ "$(INSTALLTOP)" != "/usr" ]; then \
echo 'OpenSSL shared libraries have been installed in:'; \
echo ' $(INSTALLTOP)'; \
fi; \
fi
cp libcrypto.pc $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
cp libssl.pc $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
cp openssl.pc $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
uninstall_sw:
cd include/openssl && files=* && cd $(DESTDIR)$(INSTALLTOP)/include/openssl && $(RM) $$files
@for i in $(LIBS) ;\
do \
test -f "$$i" && \
echo $(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i && \
$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
done;
@if [ -n "$(SHARED_LIBS)" ]; then \
tmp="$(SHARED_LIBS)"; \
for i in $${tmp:-x}; \
do \
if [ -f "$$i" -o -f "$$i.a" ]; then \
if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
echo $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$c; \
$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$c; \
echo $(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
else \
echo $(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
fi; \
if expr $(PLATFORM) : 'mingw' > /dev/null; then \
case $$i in \
*crypto*) i=libeay32.dll;; \
*ssl*) i=ssleay32.dll;; \
esac; \
echo $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$i; \
$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$i; \
fi; \
fi; \
done; \
fi
$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
@target=uninstall; $(RECURSIVE_BUILD_CMD)
install_html_docs:
here="`pwd`"; \
filecase=; \
case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
filecase=-i; \
esac; \
for subdir in apps crypto ssl; do \
$(PERL) $(TOP)/util/mkdir-p $(DESTDIR)$(HTMLDIR)/$$subdir; \
for i in doc/$$subdir/*.pod; do \
fn=`basename $$i .pod`; \
echo "installing html/$$fn.$(HTMLSUFFIX)"; \
cat $$i \
| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
| pod2html --podroot=doc --htmlroot=.. --podpath=$$subdir:apps:crypto:ssl \
| sed -r 's/<!DOCTYPE.*//g' \
> $(DESTDIR)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
grep -v $$filecase "^$$fn\$$" | \
(cd $(DESTDIR)$(HTMLDIR)/$$subdir; \
while read n; do \
PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
done); \
done; \
done
uninstall_html_docs:
here="`pwd`"; \
filecase=; \
case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
filecase=-i; \
esac; \
for subdir in apps crypto ssl; do \
for i in doc/$$subdir/*.pod; do \
fn=`basename $$i .pod`; \
$(RM) $(DESTDIR)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
grep -v $$filecase "^$$fn\$$" | \
while read n; do \
$(RM) $(DESTDIR)$(HTMLDIR)/$$subdir/"$$n".$(HTMLSUFFIX); \
done; \
done; \
done
install_docs:
@$(PERL) $(TOP)/util/mkdir-p.pl \
$(DESTDIR)$(MANDIR)/man1 \
$(DESTDIR)$(MANDIR)/man3 \
$(DESTDIR)$(MANDIR)/man5 \
$(DESTDIR)$(MANDIR)/man7
here="`pwd`"; \
filecase=; \
case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
filecase=-i; \
esac; \
set -e; for i in doc/apps/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
pod2man \
--section=$$sec --center=OpenSSL \
--release=$(VERSION) `basename $$i`) \
> $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
(grep -v "[ ]"; true) | \
(cd $(DESTDIR)$(MANDIR)/man$$sec/; \
while read n; do \
PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
done); \
done; \
set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
pod2man \
--section=$$sec --center=OpenSSL \
--release=$(VERSION) `basename $$i`) \
> $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
(grep -v "[ ]"; true) | \
(cd $(DESTDIR)$(MANDIR)/man$$sec/; \
while read n; do \
PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
done); \
done
uninstall_docs:
@here="`pwd`"; \
filecase=; \
case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*) \
filecase=-i; \
esac; \
for i in doc/apps/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
echo $(RM) $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(RM) $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
(grep -v "[ ]"; true) | \
while read n; do \
echo $(RM) $(DESTDIR)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
$(RM) $(DESTDIR)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
done; \
done; \
for i in doc/crypto/*.pod doc/ssl/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
echo $(RM) $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(RM) $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
(grep -v "[ ]"; true) | \
while read n; do \
echo $(RM) $(DESTDIR)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
$(RM) $(DESTDIR)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
done; \
done
# DO NOT DELETE THIS LINE -- make depend depends on it.
Computing file changes ...
